Skip to content
Plana

Release notes

What changed in each released version, as far as you will notice it.

Plana 1.8

The version you are using

  • Before Plana sends a notification to employees, it now asks you to confirm and says what will happen and how many people will be notified. This applies to approving an absence, asking for a substitute, choosing a substitute and sending consent requests in one go. If something changes while you confirm, nothing is sent and Plana asks you to confirm again.
  • A shift swap between two employees now takes effect only when both approve it, and then both shifts change at the same time. If the shift is changed before the employee answers, the proposal expires and the roster stays as it is. The Muutokset page shows whether a swap is waiting for the other person or did not go through.
  • In the payroll export, the overtime, supplement and hourly-pay rows are now split by exact amounts. Employees who could not be exported before because of a rounding difference can now be exported. Each employee's gross total stays the same.
  • The overview on the publish page now opens on the current week by Finnish time. Before, opening it on Monday between midnight and 3 a.m. showed the previous week.
  • In the employee window's pay history, each start date now shows only the latest pay. Before, the same date could appear several times.
  • Dates in the roster page's check messages are now written the same way as elsewhere on the screen, for example 03.11. When you open or close the rule check, the hint bubble on top of it now closes.

Plana 1.7

  • When you edit an already published shift on the web or in the mobile app, Plana first shows a confirmation that says who the change is sent to for approval. The change takes effect once the employee approves it in the Plana app. Until then the roster stays as it is.
  • If a save fails and you leave the form unchanged, the message in the save bar now stays for a moment and then leaves with the bar. Before, it stayed on screen for good.
  • When an employee's personal details have been updated elsewhere, the document upload window now shows and saves the latest details. The older right-to-work basis that was on screen when you opened it is no longer written back.
  • In settings, the date shown on the Review period for average minimum hours row now follows Finnish time. Before, a change scheduled just after midnight could show the previous day's date.

Plana 1.6

  • In the work-right card on the documents tab of the employee page, reports already submitted for starting and leaving stay visible. Click the date to change the submission date or undo that report.
  • When you submit while offline, the page now fails straight away with a message instead of spinning, and it will not resend on its own once you are back online.
  • Once an organisation has a published schedule or logged hours, the owner can no longer change the start date of the three-week period: the field in settings is greyed out with the reason shown, and the period of months already settled is no longer rewritten.
  • If you open an employee through another store's address and that person does not work there, the page now falls back to their main store and all five tabs show their content.
  • In the export for the immigration report, pay, date of birth and identity number come straight from the system, and the owner can only fill in address, contact person and taxable benefits. The preview lists just the items still missing.
  • In the starter schedule panel, a row that hit an error is no longer created twice. If the shift type was added but the page did not refresh, it says so and offers a refresh button.
  • Times across the product are now written with a dot, for example 10.00, instead of a colon.
  • On the hours page, a period before the balancing period has started is no longer blank: it says when the balancing period begins, that this period comes before it, and that hours are counted in three-week periods on their own.
  • When you paste a staff list during setup, hourly pay and start dates are now saved along with the names instead of being dropped. The submit button shows a busy state while saving.

Plana 1.5.4

  • You can now set an employee's target straight from the employee list on the Demand page: how much they take home each month, or how many hours they work per period. Employee targets are a Pro feature.
  • When you prepare additional-work and overtime consent requests on the Demand page, you can now tick additional work or overtime for everyone at once; on a phone, each box says which one it is.
  • In the TES notes panel on the roster, the number next to Hide all now matches the counts shown for each person.
  • Times are now written like 10.00 in more places, for example in emails, on employees' own page and on shared rosters.

Plana 1.5.3

  • Shift types on the Demand page are now grouped by team. Suggestions calculated from your opening hours are shown with a dashed outline and are saved only when you tick them and press Add. Tap a suggested shift type's time to change it directly; paid hours are recalculated using the original unpaid break.
  • On an employee's Documents tab, you now see a Finnish Immigration Service notification card for non-EU employees whose start of employment has not yet been reported, with a link to the form and three steps. The right-to-work card now has an explanation too.
  • Before auto-scheduling, if a team that has staffing needs has no one in it, Plana tells you which team it is and takes you to the Employees page to assign people to it.
  • Collective agreement notes on the roster can now be collapsed per person, or all expanded or collapsed at once. ✕ hides a note rather than deleting it: bring it back with Restore hidden in the same group.
  • Shift blocks on the roster board are now as tall as their content and aligned to the top, instead of stretching to fill the row.
  • Switching between employees on the Employees page no longer flashes a blank view before the details appear.
  • When a salaried employee's contract hours are empty, the field now says which full-time hours per three-week period are used, and Fill in adds them for you.
  • Times on the roster are now written as 9.00, and open-shift cards show durations as 6,0 h, matching the rest of the app.

Plana 1.5.2

  • When you open Pay estimate, you first see the summary: roughly how much the month comes to, and who is left out of the calculation and why, with each reason naming the employee and the pay item. If the data cannot be read, the page says so and lets you try again instead of showing 0. The calculation and the export file have not changed.
  • In a new store that has not published a roster yet, the Employees page first shows a simple list with only what you need to get started, and one main action for adding your first employees. Sent invitations show the date they are valid until.
  • Dates now always show the day and month with two digits, and a single day is no longer shown as a range. Publishing emails, printed rosters and export file names use the same format.
  • Times are now shown as 10.00. You can type 24 as the end time of a shift that ends at midnight.
  • When you open a shift on the roster, the main button is now “Edit shift…”.
  • When you use the Plana web app on a phone, the bottom navigation now has five items and Publish is under More.
  • When you view the week on a phone, the first violation is shown at the top and violation cards can be expanded for details.
  • On the phone planning view, a small dot appears next to a collapsed panel's title when the panel has content.
  • When a new store sets up automatic scheduling and team sizes are prefilled, employees with 0 contract hours are no longer counted as available for shifts.
  • When you open an employee on the Employees page, their details on the right appear faster.
  • Home now opens much faster, and switching months in Pay estimate is quicker.
  • On Needs and targets, the add shift type menu now opens below its button, and when you expand an employee the weekly fixed schedule shows proper text.
  • When you move between pages in Plana, the current page stays until the new one is ready, with no grey placeholder blocks in between. The menu item you click is highlighted at once, and a thin progress line at the top shows the page is opening. The report line at the bottom of Home no longer flickers while it loads.
  • On Needs and targets, the arrow at the right end of each person’s row can now be clicked to open it, and the arrow for the consent details opens and closes together with the table and is easier to see.

Plana 1.5.1

  • The store rest rules are active again. If rest rules are changed after a schedule is published, the published schedule still calculates hours by the rules at the time of publishing.
  • When you change pay in People, you can choose the effective month; it defaults to the current month and the change only applies from that month onward. Months already exported to accounting can no longer be changed, and updating pay from the contract page follows the same rule without changing earlier months.
  • When you choose full-time for a new employee, the contract hours are now filled in automatically: 112.5 hours per three-week period under the restaurant collective agreement. For retail, no hours are filled in. Existing employees are not affected.
  • The reasons list on the Pay estimate page now shows employee names and pay item names instead of internal IDs.
  • Scheduling hint cards show the employee name and date again, and the daily rest hint no longer ends with a double period.
  • In wage history, the start month before a pay change is no longer skewed by the archived row, and the change history shows every adjustment.
  • If the working time unit on a contract is left empty, it is now shown and saved as hours per month, so blank or inconsistent units no longer appear.
  • The week view marks rule hints, and the rule check list and detail panel explain scheduling issues in short sentences.
  • The month format for the wage effective date is now consistent.
  • The auto-approval instructions on the settings page now have a line-width limit, so on wide screens the text no longer stretches into one very long line.
  • The occasional permission error when deleting a shift or checking rest time has been fixed.
  • On a narrow phone screen, the collapsed row in scheduling shows the number of hints, with violations and open shifts side by side; when there is no data, it no longer shows 0.
  • On the scheduling page on a narrow phone screen, the count, filters and need targets collapse into one row by default, so the first screen shows a complete shift row.

Plana 1.5

  • On the payroll page, store managers and location-level owners can now confirm the hours for their own store. More people can confirm, and the amounts are calculated the same way as before.
  • On the data page each period now has a single cost figure that matches the period comparison, and the parts in the breakdown card add up to the total. If someone's pay data is missing, the row shows that it cannot be read and the total is marked ≥ instead of being estimated from the minimum wage table; the payroll page and exports are unchanged.
  • The update card on the home page is only marked as seen when you press confirm or close it, and new accounts no longer see the card. When it appears, the first screen does not shift down, and the page names on the card follow the names in the left column.
  • On the phone view of the home page and the schedule: pending requests use the same word as the list, the number of to-dos appears once, nobody having clocked in no longer shows 0 people, an empty week gets a neutral dashed date bar, and the headcount card's explanation sits behind the ⓘ.
  • When imports are switched off, the menu item for importing past hours and its tooltip no longer open the panel; they tell you that importing is not open yet.
  • After saving on the schedule page, the messages shown at the same time no longer contradict each other.
  • The founding price at the top of the pricing page now matches the price card below and states that the offer covers only the first 12 months. On the sign-up page, a greyed-out button says why right next to it, and the secondary button for entering your own details and the notes are easier to read.
  • In the export settings on the payroll page, overtime codes and meal benefits are described in plain words, the explanations sit behind the ⓘ, and opening them no longer widens the page. Amounts and rows are unchanged.
  • On the employee account page the two invite buttons each carry a short line of explanation, the phone number field is no longer covered by the save bar, the notes sit behind the ⓘ, and job role tags come with a brief explanation.
  • After publishing, the page now guides you to invite employees instead of saying they can already see the schedule. The deadline sentence no longer carries a section number, and the preview's right edge fades out.
  • The employees page opens faster: the edit employee, bulk invite and add employee windows now load only when you open them. Their contents are the same.
  • In the employee profile, a fixed entry blocked by rest is no longer shown as leave, and a time range ending at 24:00 now shows 24 in that row.
  • Numbers in the schedule hints now show one decimal place instead of a long tail.
  • On a published schedule you can now record shift swaps that actually happened on past days.
  • Weekly fixed times in the employee profile now include rest, which you can mark as required or preferred.

Plana 1.4

  • In the hours breakdown, hours that cannot be read are left blank instead of shown as 0. Every row and the total use the same source, so the rows add up to the total.
  • For a new workplace with no employees, automatic scheduling now shows the actual reason it is unavailable and provides a link to add employees. If the applicable agreement cannot be read, Plana does not guess which set of rules to use.
  • At a viewport width of 1280 pixels, the entire Sunday column is now visible without horizontal scrolling.
  • The summary now lists correction requests in the waiting section and leaves the count blank when it cannot be read instead of showing 0. Selecting the section opens the correction requests on the hours page.
  • When an export is blocked on the payroll page, the number of missing dates is now shown, and the affected date range can be expanded. There is only one main action in the blocked area, which opens schedule publishing, and the guidance beside the button varies by the user's role.
  • The invitation dialog on the staff page now shows which employees have received invitation emails. Recipients can use the email address that received the invitation to create an account from the link.
  • The missing-hours assessment and the equal-distribution explanation now treat 0 contracted hours as a missing contractual basis and state this clearly.
  • The payroll page now shows the estimated take-home pay first. If an export is blocked, the reason and missing dates are combined in one expandable row, while other information is placed under More information.
  • Prefilled staff counts on demand cards are now calculated using each employee’s weekly hours limit, without spreading missing hours to others. If contracted hours exceed opening hours, the prefilled count may be lower, so the staff count used in automatic scheduling and labour costs will change accordingly; payroll calculation is unchanged.
  • Employees whose contracts specify 0 hours now join the equal-distribution groups for hours. Automatic scheduling may assign them a different number of shifts, which can change the total labour cost; payroll calculation is unchanged.
  • The privacy notice now explains that Plana processes employee email addresses to send invitations. The same notice is available in all five languages.
  • On the employee page, you can select recipients and send invitation emails. The emails are available in five languages, and the send history and message processing status are retained.
  • When checking a proposed schedule, the estimated take-home pay now includes the same compensation for hours below the contractual minimum as payroll exports, and paid sick leave from a previous period and days when an employee cannot work are calculated on the same basis as on the payroll page. As a result, a schedule below the contractual minimum raises the estimate and may change the shifts chosen by automatic scheduling; the payroll page and export calculations themselves are unchanged.
  • In the staff ledger, employees without a start date now show any existing annual-leave opening balance. If a year already has a record, the entry dialog warns before replacing it so existing data is not changed accidentally.
  • Automatic approval is now on by default for new workplaces, with a 15-minute approval window; existing workplace settings are unchanged. Workplaces with no attendance settings and no clock-ins for 60 days are also switched on automatically.
  • On the payroll and work details page, when the schedule cannot be read, the number is labelled «Calculated from clock-ins», and the label links to the schedule publishing page.
  • On narrow screens, bonus cells in the work details wrap onto a second line instead of being cut off, and the bonus column heading remains available to screen readers.

Plana 1.3

  • The setup page now has an “Opening hours” field, pre-filled with 10:00–22:00 every day and editable. A new shop’s default shift types (morning and evening) are made from these hours, and after setup you go straight to the schedule.
  • Before the first automatic scheduling, the schedule page shows a “How many on shift?” card with the rows “Usually” and “Fri–Sat evening”. The numbers are pre-filled from contract hours and opening hours and you can change them; “Schedule the whole period” saves them as the staffing need.
  • Employees can now see their own shifts on the web. They follow the invite link, choose “Set password” (or create an account with email), sign in, and see “Your next shift” plus published shifts for this, the previous and the next period. Time off, swaps and clocking in stay in the app.
  • If an employee’s email isn’t found in the staff list, they enter their name and the shop name or manager’s email and choose “Send to manager”. Owners and managers get an email and a count appears on “Staff” in the menu. The account is connected only after the owner picks the right employee and presses “Confirm it is them”.
  • Entering tax cards on the web is now open, as announced in 1.2: in the employee’s “Pay and tax card” tab, choose “Enter tax card”, fill in the start date, tax rate, additional rate and income limit, and press “Save tax card”. Pay features are part of the Pro plan (available during the trial on new accounts); on other plans this area shows a plan notice.
  • Employee details have a new “Pay structure” section: fixed monthly allowances and benefits such as housing, car or phone are recorded one item per row. Choose “Add pay item” and “Save this item”; each item saves immediately, and you end an item by giving it an end date instead of deleting it.
  • Shops scheduled under the Kaupan collective agreement can now set the balancing period in Settings, on the “TES and rules” tab: a start date (a Monday) and a length of 2–52 weeks. Plana then checks that each person’s contract hours are met over the whole period. The “Set the balancing period →” link in the schedule’s rules drawer goes straight there.
  • The schedule board’s rule check has a new option, “Show only people with issues”. When it is on, the board keeps only the employees who have a notice, with “Showing x of y employees” beside it; “Show all” brings the full list back.

Plana 1.2

  • Entering tax cards in the Plana web app opens in the next version. Until then, employees save their own tax card in the app.
  • Employees can save their own tax card in the app, and their pay is calculated with it.
  • Consent to additional hours can be written into the contract or recorded as given in person. Missing consent no longer blocks publishing; it shows as a note.
  • When there aren't enough shift types, you can add the missing ones in one click and generate the roster again.
  • The Staff page opens faster: the contract, documents and pay tabs load only when you open them.

Plana 1.0

  • Setting up a new account starts with your company and restaurant details. If the company isn't found in the business register, you can fill in the details yourself.
  • On the Staff page, each employee's details are now split into tabs: basics, pay, contract, schedule and account.